Products and spare parts from MAXI-PRESS save money and valuable resources
Laundries are one of the most energy-intensive trades. For example, the heat required to dry and iron laundry results in high ancillary costs. In the current situation, many businesses can no longer reasonably calculate or pass on the corresponding expenses. An electricity and gas bill three times higher than just a few years ago is not uncommon and there are no signs of any real easing in energy prices. More and more laundries are therefore looking for clever solutions to save resources and cut costs in the long term. Below are some examples of how the right spare and wear parts from MAXI-PRESS help to save money in the long term:
I. Well pressed is half dried and twice saved – water extraction membranes
The drier the laundry, the less energy has to be invested in the subsequent drying and downstream process. The optimum degree of residual moisture is ensured by water extraction presses, which operate at high pressure and press the water out of the laundry after washing. These are equipped with special membranes that protect the laundry and support the process. Especially the high-tech water extraction membranes made by MAXI-PRESS which are extremely robust and at the same time highly elastic. They guarantee a particularly good residual moisture result and are at the same time gentle to the laundry. Depending on the requirements, these membranes are made of specially developed types of rubber, which are characterized by particularly high durability, tensile strength, temperature resistance as well as high tear resistance and low deformation. The unique jet-shaped TOUCH-pressing surface of the MAXI-PRESS membranes ensures that the water is discharged in a targeted manner and reduces the risk of sticking laundry - this reduces downtimes and also helps to save costs.
Innovative solutions from MAXI-PRESS offer even more savings potential:
With its EASYFIX product series, MAXI-PRESS offers water extraction membranes with an already built in fastening ring. This allows easiest installation and greatly improved service time! In addition, the old and worn fastening rings, which are very costly to replace, no longer need to be replaced offering further savings options for prudent laundry owners.
All membranes are also available as ANTI-BACT, in which the products are made of an antibacterial material that actively prevents bacteria from forming on the membrane surface. Thanks to ANTI-BACT, the cleaning cycles of the presses can be sustainably reduced without causing contamination of the laundry. With their Hohenstein certificate, ANTI-BACT membranes offer further savings potential, especially for laundries in the hospital and care facilities sector. The MAXI-PRESS membranes are compatible with the water extraction presses of all common manufacturers and convince both with their top price-performance ratio and their extra long service life.
Savings potential with MAXI-PRESS membranes:
• Inexpensive to purchase
• Fast delivery
• Longer life and durability thanks to high quality
• Top pressing performance ensures less energy in the subsequent drying and downstream process
• Radiant TOUCH pressing surface reduces sticking of the laundry
• Longer cycles and less membrane cleaning time thanks to ANTI-BACT
• Fast installation time (up to 80%) and low material costs thanks to EASYFIX
• EASYFIX membranes significantly exceeds the pressing cycles of conventional membranes from other manufacturers
II. New spring coverings for all ironers
MAXI-PRESS has optimized the spring coverings for industrial ironers to the latest technical standards. The newest model "MP-X-Spring Pro" is an in-house development of the spare parts specialist and is characterized above all by the selected material. The springs are made of 100% stainless steel and are therefore completely rust-free, even over long operating cycles. Another advantage with a lot of savings potential is when using the MP-X-Spring Pro spring covering, the optimal roller circumference of the ironer is already achieved with only 1 bar contact pressure. The lower roller resistance thus protects the gears of the ironer and also leads to energy savings. In the long term, the improved exhaust air of the spring also ensures less cloth wear, which reduces costs.
Unlike other common spring coverings, the spring band cannot break and is resistant to chemicals, which is particularly useful for hospital laundry. MP-X-Spring Pro guarantees optimal ironing performance over the entire service life, an ideal linen finish and, thanks to the perfect fit of the ironer cloths, also a longer running time of the textile.
Savings potential with "MP-X-Spring Pro" cylinder covering from MAXI-PRESS:
• Lower contact pressure protects the gears and saves energy
• Improved spring exhaust ensures less cloth wear
• Long, rust-free runtime due to 100 % stainless steel
• Longer running time of the ironer textile thanks to their permanent perfect fit
III. MAXI-PRESS own spare parts with top price-performance ratio
Every additional dealer between manufacturer and user automatically increases the prices. MAXI-PRESS detours to laundry customers. This enables MAXI-PRESS to directly influence both the quality of the products and the prices, i.e. to create a top price-performance ratio itself. For OEMs (original equipment manufacturers), spare parts for large batch washers, for example, are not part of their core business, which is often reflected negatively in their prices. MAXI-PRESS, on the other hand, concentrates its offerings completely on spare parts for laundry systems such as monorails, batch washers, dryers, feeding systems and ironer supplies – in many cases from its own production – and can thus make the prices correspondingly attractive. The products Made in Germany are compatible e.g. with Jensen, Kannegiesser, Lavatec and many other manufacturers.
Savings potential with MAXI-PRESS spare parts for laundries and ironer supplies:
• Low prices thanks to lack of intermediaries
• Core competence in spare parts and supplies, compatible with major manufacturers
• Fast delivery reduces downtime
• Top quality Made in Germany enables long-lasting spare parts